My system will not come on automatically in reverse but comes on manually via the ON/SB button.
This is typically the result of incorrect wiring or loss of trigger voltage at the monitor Areas to look at include:
| |||
|---|---|---|---|
| Yes | No | ||
Step 1 |
Your monitor should be equipped with a fuse in the reverse (Blue) trigger wire. Check the fuse. Is it blown? | Replace 5 amp fuse and retest |
Go to step 2 |
| Step 2 | Check the voltage supplied to the monitor on the blue wire when the vehicle is placed in reverse. The proper operating voltage can be found on the serial number tag on the back of the monitor. Do you have the proper voltage? | Go to step 3 | Apply correct voltage and retest |
| Step 3 | Contact your INTEC Service Rep. They may ask you to return your monitor for service. | ||