My screen lights up but I do not get a picture.
This is typically the result of a loss of video to the monitor. Areas to look at include:
| |||
|---|---|---|---|
| Single Camera System Troubleshooting | Yes | No | |
Step 1 |
Are there any signs of damage to the monitor, camera or camera cable? | Repair damage and retest |
Go to step 2 |
| Step 2 | Check the connections between camera and camera cable and monitor and camera cable. Make sure they are all connected properly. Did this fix your problem? | Done | Go to step 3 |
| Step 3 | Contact your INTEC Service Rep. They may ask you to return equipment for service. | ||
| Multi Camera System Troubleshooting | Yes | No | |
| Step 1 | Do any of the camera positions (with cameras connected) produce an image? | Go to step 2 | Go to step 4 |
| Step 2 | Unplug one of the camera cables from a working position and move it to the position(s) that is not working. Does the non-working position(s) now show an image? Make sure you’ve selected the correct position via the switch. | Go to step 3 | Go to step 7 |
| Step 3 | Place the camera cables back in their original position and move only a working camera to the position(s) that are not working. Do you get an image? | Contact your INTEC Service Rep. They may ask you to return your camera for service. | Check the camera cable for damage. It may need replaced. |
| Step 4 | Is there a separate Car Vision switcher in your system? | Go to step 5 | Go to step 7 |
| Step 5 | Check your monitor to switcher cable. Make sure it is not damaged and connected properly. Did this correct your problem? | Done | Go to step 6 |
| Step 6 | Unplug one of the camera cables from the switcher and plug it directly in to the monitor pigtail. Do you get an image? | Contact your INTEC Service Rep. They may ask you to return your switcher for service. | Go to step 7 |
| Step 7 | Contact your INTEC service rep. They may ask you to return your monitor for service. | ||