The wrong camera comes on in reverse.
This is typically the result of incorrect wiring at the controller or controller power harness. Areas to look at include:
| |||
|---|---|---|---|
| Yes | No | ||
Step 1 |
Check the camera connections at the controller. Is the rear camera cable connected to the Camera 1 input? | Go to step 2 |
Plug the rear camera cable into the Camera 1 position and retest |
| Step 2 | Is the Blue wire from the controllers power harness connected to reverse? | Go to step 3 | Connect the blue wire to reverse and retest |
| Step 3 | Contact your INTEC Service Rep. They may ask you to return your controller and controller power harness for service. | ||