Camera Towers

INTEC has teamed up with Tempest Fireco Towers to provide a full range of pneumatic telescoping towers. Below are some of the standard features available on every Tempest Fireco Tower.

  • - Factory is ISO9001 operations & NATO rated.
  • - UL certification of NFPA-1901 compliance.
  • - Tower requires no routine lubrication. All internal lubrication is performed during assembly.
  • - Precision machined tubes of corrosion resistant, anodized aluminum.
  • - Tower can be positioned at any increment to full height without first reaching full height extension.
  • - Pneumatic height extension may be achieved with a compressed air supply from chassis air brakes, breathing    air system, hand pump or small electric air compressor.
  • - Tower features an upper tubular protection cover that keeps dust and water away from the seal rings when in the    retracted position.
  • - Tower comes equipped with Tempest's exclusive keyway system, which prevents tower rotation and damage in    windy conditions.
  • - Condensation drainage holes at each section.
  • - Tower is provided with pre-drilled lower mounting brackets (flange mounting bracket).
  • - Tower is provided with pre-drilled upper head assembly brackets(top heads) for mounting lights, tilt/turn units,    cameras and other equipment.
  • - 2 year warranty standard on all tower units.
  • - Look-up light & "Tower Extension Warning" switch.
  • - Air Safety Relief Valve at bottom of each tower.
  • - Power Junction boxes at top and bottom of tower on units with internal cables.

Tempest Fireco Towers are available with a multitude of options which include being portable, interior or exterior mounted, having manual or electric rotation, tilt and turn, wireless remote control and a variety of internally-placed cables.

Below are specs for just 4 of the more than 4000 permutations of towers available from Tempest.



Spec Sheet
CS3520N - 19' 7" Tower
Spec Sheet
CH3718N - 26' 5" Tower
Spec Sheet
CH3805N - 33' 9" Tower
- Extended Height: 19' 7"
- Retracted Height: 68"
- Max Top Load: 99 lbs.
- Number of Sections: 5
- Base Tube Diameter: 4.53"
- Max Wind Speed: 74 mph @ 740    sq. in.
Learn More...
- Extended Height: 26' 5"
- Retracted Height: 73"
- Max Top Load: 265 lbs.
- Number of Sections: 7
- Base Tube Diameter: 4.98"
- Max Wind Speed: 68 mph @ 742    sq. in.
Learn More...
- Extended Height: 33' 9"
- Retracted Height: 79"
- Max Top Load: 176 lbs.
- Number of Sections: 8
- Base Tube Diameter: 5.98"
- Max Wind Speed: 68 mph @ 742    sq. in.
Learn More...


Spec Sheet
CX4103N - 41' Tower
- Extended Height: 41'
- Retracted Height: 80"
- Max Top Load: 176 lbs.
- Number of Sections: 11
- Base Tube Diameter: 7.87"
- Max Wind Speed: 62 mph @ 742    sq. in.
Learn More...